Thank you….very much appreciated….any info on torque for 35-1 and do you now use any lubricant, any preventative measures going forward. I didn’t notice the plates being different size so thank you I will double check and re-measure. > On Oct 3, 2017, at 12:36 PM, Della Barba, Joe via CnC-List > <cnc-list@cnc-list.com> wrote: > > I did this years ago when the iron/steel plates C&C used were rusting to > pieces. It was not complicated, I took two of them (big ones and smaller > forward one) to the local shop and they made stainless versions. They are > just rectangles with holes in them. > Joe > Coquina C&C 35 MK I > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Glen Eddie > via CnC-List > Sent: Tuesday, October 3, 2017 12:32 PM > To: Liz Mather via CnC-List <cnc-list@cnc-list.com>; cnc-list@cnc-list.com > Cc: Glen Eddie <ged...@torkinmanes.com> > Subject: Re: Stus-List Keel backing plates and washers replacement 35-1 > > There is a guy in the toronto area that will prefab the backing plates etc > and install them for you. I will look for his name. > > From: Liz Mather via CnC-List > Sent: Tuesday, October 3, 2017 12:28 PM > To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Reply To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Cc: Liz Mather > Subject: Stus-List Keel backing plates and washers replacement 35-1 > > Good Morning! > > I have a question actually looking for opinion and experiences replacing the > keel backing plates, washers complete. > Thinking of replacing backing plates with 400 series stainless. > I was searching the list for previous discussions, found some but just > looking for as much info as possible. > Also wondering about lubricant, loctite suggestions, opinions. > Most importantly looking for torque info, tables etc. > > So grateful for any info and responses! > > Best Regards, > > Liz Mather > Mistral V C&C 35-1 > Midland > > > > Glen Eddie > Tel: 416-777-5357 > Fax: 1-888-812-2557 > > Torkin Manes LLP > Barristers & Solicitors > > This email message, and any attachments, is intended only for the named > recipient(s) above and may contain content that is privileged, confidential > and/or exempt from disclosure under applicable law. If you have received this > message in error, please notify the sender and delete this email message. > Thank you. > > > _______________________________________________ > > The bills have started coming in for the year 2018 and have gone up again. > October will be our fund raising month. Please consider sending a small > contribution to help keep this list running. Use PayPal to send contribution > -- https://www.paypal.me/stumurray <https://www.paypal.me/stumurray> > > All contributions are greatly appreciated! > _______________________________________________ > > The bills have started coming in for the year 2018 and have gone up again. > October will be our fund raising month. Please consider sending a small > contribution to help keep this list running. Use PayPal to send contribution > -- https://www.paypal.me/stumurray <https://www.paypal.me/stumurray> > > All contributions are greatly appreciated!
_______________________________________________ The bills have started coming in for the year 2018 and have gone up again. October will be our fund raising month. Please consider sending a small contribution to help keep this list running. Use PayPal to send contribution -- https://www.paypal.me/stumurray All contributions are greatly appreciated!
