Probably but since Oberdorfer offers the 837 model with shortened barbs, I
think cutting one of the barbs will work fine.  Plan to install it this
afternoon.  Will report back.

Dennis C.
Touche' 35-1 #83
Mandeville, LA

On Tue, Apr 3, 2018 at 11:16 PM, Russ & Melody via CnC-List <
cnc-list@cnc-list.com> wrote:

> Hi Dennis,
>
> Is there room to put a nipple extender on one the elbows so it can swing
> above the companion?
>
> (apologies to anyone who gets hit by their nanny software)
>
>         Cheers, Russ
>         *Sweet *35 mk-1
>
>
> At 11:20 AM 3/29/2018, you wrote:
>
> I'm still researching the correct pump. Â
>
> I've pretty much determined the issue with the Oberdorfer is the spacing
> between inlet and outlet when one tries to re-use the elbows from the
> Sherwood.  There isn't enough clearance for the second elbow to swing past
> the first elbow.  I think installing one of the elbows then cutting a bit
> off the barb on the second elbow is the solution.  The Oberdorfer
> N202M-837 is simply an Oberdorfer N202M-908 with two short barb elbows and
> about $70 added to the price.
>
> The online pricing for the 908 varies significantly.  Lowest so far is
> $326.
>
> Dennis C.
> Touche' 35-1 #83
> Mandeville, LA
>
>
>
> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
>  Virus-free.
> www.avg.com
> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
> <#m_8696428075897178811_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> _______________________________________________
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to