Swapped the Sherwood out with the Orberdorfer. Only had to cut about 1/8 inch of the barb off the inlet elbow. Straightforward job.
Time to go sailing. Dennis C. Touché 35-1 #83 Mandeville, LA Sent from my iPhone > On Apr 4, 2018, at 6:58 AM, Dennis C. <capt...@gmail.com> wrote: > > Probably but since Oberdorfer offers the 837 model with shortened barbs, I > think cutting one of the barbs will work fine. Plan to install it this > afternoon. Will report back. > > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > >> On Tue, Apr 3, 2018 at 11:16 PM, Russ & Melody via CnC-List >> <cnc-list@cnc-list.com> wrote: >> Hi Dennis, >> >> Is there room to put a nipple extender on one the elbows so it can swing >> above the companion? >> >> (apologies to anyone who gets hit by their nanny software) >> >> Cheers, Russ >> Sweet 35 mk-1 >> >> >> At 11:20 AM 3/29/2018, you wrote: >>> I'm still researching the correct pump.  >>> >>> I've pretty much determined the issue with the Oberdorfer is the spacing >>> between inlet and outlet when one tries to re-use the elbows from the >>> Sherwood. There isn't enough clearance for the second elbow to swing past >>> the first elbow. I think installing one of the elbows then cutting a bit >>> off the barb on the second elbow is the solution. The Oberdorfer >>> N202M-837 is simply an Oberdorfer N202M-908 with two short barb elbows and >>> about $70 added to the price. >>> >>> The online pricing for the 908 varies significantly. Lowest so far is >>> $326. >>> >>> Dennis C. >>> Touche' 35-1 #83 >>> Mandeville, LA >> >> Virus-free. www.avg.com >> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each and >> every one is greatly appreciated. If you want to support the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray >> >> >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray