I have raced on a couple of J-80’s and now on a C&C115. All have rope – all have furlers, and they don’t take anything down during the season.
Don’t see a problem. Gary From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of Joe Della Barba via CnC-List Sent: Tuesday, May 15, 2018 11:12 AM To: cnc-list@cnc-list.com Cc: Joe Della Barba <j...@dellabarba.com> Subject: Re: Stus-List Time for new halyard... Recommendations? Is rope suitable for furling sails that might not come down more than once a year? Coquina Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Nylander via CnC-List Sent: Tuesday, May 15, 2018 10:27 AM To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> Cc: Gary Nylander <gnylan...@atlanticbb.net <mailto:gnylan...@atlanticbb.net> > Subject: Re: Stus-List Time for new halyard... Recommendations? I switched from wire/rope to rope without a problem. Gary 30-1 From: CnC-List <cnc-list-boun...@cnc-list.com <mailto:cnc-list-boun...@cnc-list.com> > On Behalf Of Joel Aronson via CnC-List Sent: Tuesday, May 15, 2018 10:00 AM To: cnc-list <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Cc: Joel Aronson <joel.aron...@gmail.com <mailto:joel.aron...@gmail.com> > Subject: Re: Stus-List Time for new halyard... Recommendations? If there are rough spots on the sheaves they need to be replaced before switching. Also, you need to make sure the sheave is wide enough for the rope you want to use. Joel On Tue, May 15, 2018 at 9:47 AM, Joe Della Barba via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: My jib halyard is shot. I always assumed I needed another wire/rope because the sheaves are made for wire and would damage an all rope halyard. Is this wrong? Coquina C&C 35 MK I Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com <mailto:cnc-list-boun...@cnc-list.com> ] On Behalf Of Neil Andersen via CnC-List Sent: Tuesday, May 15, 2018 9:36 AM To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> ; cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> Cc: Neil Andersen <neil.eric.ander...@gmail.com <mailto:neil.eric.ander...@gmail.com> > Subject: Re: Stus-List Time for new halyard... Recommendations? Bruce, First thing is to replace the wire/rope with all rope. Neil 1982 C&C32 Rock Hall, MD every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray -- Joel 301 541 8551
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
