@Gary, I have the tree trunk. It appears to be made from the same stock as the 34. @Mike, I do admire the speed and stability that a catamaran brings. I offer little umbrellas to help balance their drinks. But other than that, they should hold on!
Charles Ferrari Destrier ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Hoyt, Mike via CnC-List <cnc-list@cnc-list.com> Sent: Thursday, September 13, 2018 2:29 PM To: cnc-list@cnc-list.com Cc: Hoyt, Mike Subject: Re: Stus-List C&C 30 - Anchor roller and anchor locker? Hi A friend bought a catamaran and nothing spills Just a thought Mike Persistence HAlifax From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Cleverboy via CnC-List Sent: Thursday, September 13, 2018 10:37 AM To: cnc-list@cnc-list.com Cc: Cleverboy Subject: Re: Stus-List C&C 30 - Anchor roller and anchor locker? Gary; My 30 is from 1973 and was raced extensively for its first ten years. Most of the fittings and lines I recognize, but, I have a track with a car running down the foredeck. The spinnaker poll has only one bridle for the uphaul. Not sure what that track helped control. I mostly solo sail with guest that wish I had a power boat so their drinks wouldn't spill. I don't think i'll miss it but was interested in it's function. Charles Ferrari Destrier ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Gary Nylander via CnC-List <cnc-list@cnc-list.com> Sent: Thursday, September 13, 2018 1:26 PM To: cnc-list@cnc-list.com Cc: Gary Nylander Subject: Re: Stus-List C&C 30 - Anchor roller and anchor locker? My 1980 version had a dorade vent with scoop in that opening. I mostly race, so remove the scoop because it hangs up various lines – spinnaker sheets and so forth. I reinstall when I want venting for the chain locker. There is a small indent for an anchor line in the deck at the forward end of the anchor locker lid. I keep the anchor in the locker until I am ready to deploy. Gary #593 From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of Cleverboy via CnC-List Sent: Thursday, September 13, 2018 9:19 AM To: cnc-list@cnc-list.com Cc: Cleverboy <cvf10...@hotmail.com> Subject: Re: Stus-List C&C 30 - Anchor roller and anchor locker? Hello, I have a 1973 30mk1. It came with what originally I assumed was a plastic covered opening for a dorade or inspection port in the bow for the V-berth. But in climbing all the way forward to check the running lights, I found that the deck opening was just forward of a bulkhead up there. So, it appears that the opening was there for the installation of a Hawspipe. The bulkhead created the space for a chain locker. I've seen other boats with hooks that would hold a dansforth anchor across the bow pulpit. Charles Ferrari Destrier C&C30 mk1 ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>> on behalf of T Smyth via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Sent: Friday, July 13, 2018 5:41 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: T Smyth Subject: Stus-List C&C 30 - Anchor roller and anchor locker? C&C 30 (1974) Hull ID CCY302860574 Any ideas where I might locate the "optional anchor roller and anchor locker" to purchase for this boat? In the current design, apparently there is no anchor locker. Curious how others are solving this problem. (When I bought the boat recently, the anchor resided in the starboard lazarette.) Thanks for any suggestions. Tom
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
