That 26’ You mentioned sounds wonderful! I’m not sure how many saber 28 are in
Canadian waters, but I really love mine. Might be worthy of your list as well?
Sent from Yahoo Mail for iPhone
On Tuesday, September 25, 2018, 3:22 PM, Shawn Wright via CnC-List
<cnc-list@cnc-list.com> wrote:
Interested in this thread, as there are two 26s in my area, and not a lot else
in the price range. I'm near Victoria, BC, and one is $9900, the other $7800.
I've been on the first one, and the broker told me an offer of $8k would take
it. Nice shape, but the owner installed a diesel heater down low on the
bulkhead, removing the table, instead of mounting above table height like most
others do. I suppose I could move it, but there was no sign of the original
table and the hole in the floor was covered with a plate. It has a newer 1GM
engine with low hours also. Has wheel steering, which looks nice, but clearance
to get behind the wheel is tight - I hit my head on the back stays, and I'm
only 5'8". The galley also seems pretty tiny for cruising. We'd be looking to
cruise Desolation Sound and the BC inside passage to start. We've owned a VW
Westfalia for many years, so we're used to small, but then we're usually
cooking outdoors when camping. In a boat, I think a decent galley might be more
important. Since our kids our grown, I also like the dinettes on the larger CCs
(what size do they start at?) for the ability to leave the table up.
Other popular options in our area are the San Juan 28 (two of them for
$13-17k), Catalina 27 (OB model, $7-9K), Catalina 30 ($20-35k) (all prices are
in CAD)
I'm currently undecided between getting a starter boat like the C&C 26, or
anything under 30', or just getting something in the 32-36' range that will
allow for more comfortable cruising, along with safety for the eventual plans
to cruise to Mexico and beyond. I've sailed small boats (laser/hobie/sunfish/FJ
etc) since I was young, but experience with keel boats is limited to a bit of
time on Martin 242 and Macgregor 26.
Would like to hear from more C&C 26 owners, as well as those with the 27, 29,
30, 32, etc. I've spent a lot of time reading up on the various models, but I'm
still not clear on which ones are best suited to my needs. The 26 seems to be
the most tender of all of them (based on a chart at the C&C site), which is a
concern, as my wife is a power boater, and doesn't like heeling over too much.
:)
On Mon, Sep 24, 2018 at 5:58 AM Chris Graham via CnC-List
<cnc-list@cnc-list.com> wrote:
Thanks so much for your response Jim.
This boat was in decent condition, but not Bristol by any means. She's been on
the hard for a year. The current owner re-cored and rebedded 4 stanchions
(sadly the work looks a bit rough but has solved the issue). cosmetic attention
needed as usual but most of the systems were intact and in working order. The
two cabin lights are permanently fogged and one cannot see out of them. The
owner said it saves on curtains, but I would like to be able to see out of
them. Not sure of the cost of replacement and rebedding those...never done that
kind of work before.
I was concerned about the engine though she started first turn on a cold 45F
day on the coast of Maine, but it idled rough and would eventually drop out.
Perhaps air in the line or governor needs adjusting? Not sure. My main concern
is the raw water cooling as you mentioned. Hard finding parts for these old
motors. Would a good descaling be a good idea or should I plan on taking the
engine apart and replacing heads, etc...or which I have little to no experience
doing! yikes!!
Compression post and cabin top looked good, no crazing and still very solid
upon hand inspection. I bounced around the deck, cockpit and cabin top and all
seemed pretty sound. hull was in great shape, decent prop...a bit of a wobble
at the cutlas bearing but not too bad.
MSG tank reeked like death. Any suggestions for cleaning and sanitizing that?
The V-Berth smelled like a sewer!! Owner said that the head barely worked, I
asked if he had lubricated the seals and checked the pump, etc...he said he
didn't think about ever doing that as he just day sails and goes over the rail
when no one is looking. Good sail inventory. new bilge pump, new impeller and
all new hoses on the engine.
I have pics I could send.
Sounds like you have your hands full for the next few months with projects.
This one would be keeping me busy as well. Toe rail rebedding ....hmmm...what
kind of a job is that??? Im getting scared!! lol
The boat is priced to sell but it would still take a great deal of work I
think, and I have to get it off the owners property which starts adding up. I
got a quote for $450 to trailer it to the water.
I do like the boat, I think it would be great in Casco Bay, Maine and a perfect
little overnighter. I have three kids, one grown and two teen daughters. It's a
good layout and size for them.
Decisions...decisions....
Chris
On Monday, September 24, 2018, 8:32:28 AM EDT, James Hesketh via CnC-List
<cnc-list@cnc-list.com> wrote:
Chris,
I've had a '78 26 for 4 years now and it is the perfect boat for my current
needs. We are the 3rd owner and it was well maintained throughout its life here
in Miami where it gets year-round use in the heat and humidity of South Florida.
When we first got it I had to replace the head on the engine -- a SB8 like
yours and have the -- and clean out the raw-water cooling system. Parts were
fairly easily available, but it took some time on the phone to locate them.
The deck needs attention under the pulpit and stanchion basses and the toe
rail could use a complete re-bedding, but a bead of calk along the deck stopped
all leaks for now. The main hatch and handrails also needed removal and
re-bedding. Also the wood in the lazerett needed some attention.
Those were all jobs that are pretty obvious and shouldn't be unexpected at its
age.
I have just recently discovered the mast step needs replacing -- first the door
to the head started getting tight at the top, then I notices a little
deformation on the tops of the bulkheads and, after a critical inspection, I
discovered some flattening of the cabin to around the mast step. Further
exploration led me the the mast step where I could feel some soft wood on its
underside all the way forward where it joins the bulkhead under the king post.
I've consulted with a rigger friend and we figure we can do the repair fairly
easily and can probably do it without pulling the mast -- probably 2 or three
days work, which I will do once it cools down here later this fall. I think the
bulkheads will be OK, but might need some reinforcement -- I'll know once the
step is done and the rigging tuned again.
It's a lovey coat and I don't mind these projects considering what we paid for
it. And figure we will get many, many, years of service once it's taken care of.
Good Luck with your search.
Jim HeskethC&C 26 WhisperCoconut Grove, FL
Hi there,
This weekend I’m heading up the coast to take a look at a 26 footer in very
good condition with an inboard Yanmar SB8 (Which I believe may be the original
engine)?
As I inspect the boat, is there anything that I should be looking at in
particular? Deck to Hall joints, chain plates, …? Anything that stands out with
the 26 in particular? Ill do the usual inspection but was just wondering if
there might be something in particular that may have plagued this design?
Chris
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
--
Shawn
Wrightshawngwright@gmail.com_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
