Josh, What Bill says. Touche' has lots of those. See:
https://drive.google.com/open?id=1ep3_LqsCzqnnNYUtU6OPFDGGeMoeA3jo Dennis C. Touche' 35-1 #83 Mandeville, LA On Wed, Dec 12, 2018 at 6:59 AM William Walker via CnC-List < cnc-list@cnc-list.com> wrote: > Josh, > For the places you need to cut headliner you might consider going to > Ace hardware or a big box store and looking at their selection of plastic > hole plugs first. If you can measure carefully you may be able to use a > properly sized hole saw to gain access to nuts on bottom side of deck > through headliner and the use hole plugs when finished for a fairly > attractive and painless completion of work. Just an idea. > Bill Walker > CbC 36 > > > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray