Even if the through hull is higher than the scupper, no water enters the cockpit (it does not drain, either, but as you said, if you already have water in the cockpit at that position, you have bigger problems to worry about).
Marek From: Garry Cross via CnC-List Sent: Thursday, January 3, 2019 12:16 To: Neil Andersen Cc: Garry Cross ; cnc-list@cnc-list.com Subject: Re: Stus-List Cockpit scupper drains Having them crossed it is easy for me to imagine a heel where the through hull is higher than the drain. On Wed, Jan 2, 2019 at 3:01 PM Neil Andersen <neil.eric.ander...@gmail.com> wrote: The issue is when the cockpit holes AND the thru-hulls are both below the line. Neil 1982 C&C 32 FoxFire Rock Hall, MD Neil Andersen 20691 Jamieson Rd Rock Hall, MD 21661
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
