Mine were made with 3/8” Barstock with hot rolled steel. I don’t know what they were thinking.
I made new ones with SS 3/8” Barstock around the same size. You can buy small pieces of barstock form McMaster and sawr and drill them if you choose to go that route. Standard washers are kind of wimpy for the amount of torque that these support, unless they are properly bedded. Bill Coleman C&C 39 Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dan via CnC-List Sent: Tuesday, January 15, 2019 9:58 AM To: cnc-list@cnc-list.com Cc: Dan Subject: Stus-List Keel Bolt Washers Hi All, I know this has been discussed many times here but this is a quick and simple one. I'm going to be torquing my keel bolts this spring and I've noticed that the washers/spacers under some of the nuts are coroding and need to be replaced. I'd like to change them out for Stainless Steel. What do you guys have for keel bolt washers/spacers and how did you get them made? Thanks! Dan Breakaweigh C&C44 Halifax, NS
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray