Adam,
I replaced my ceiling panels with new ones cut from "Foamed PVC Board".
The only trouble I had was that the old adhesive from the original
velcro was impossible to remove and the new velcro didn't stick to it
very well. My solution was to use 2" velcro.
James
"Delaney" 1976 C&C 38
Oriental, NC
On 4/20/2019 6:26 AM, Adam Hayden via CnC-List wrote:
Hello Listers
We have pretty major water intrusion coming in on the port side by the
bulkhead in the salon of our C&C 36. The water is gathering on the
edge of the fibreglass headliner and running into the storage
cupboards. I have rebedded the chain plates and handrails. The
stanchions are too far outboard. Any suggestions?
Also this has been discussed before. Has anyone replaced ceiling
panels and used velcro to hold them in? What was the best material? I
have thought of those fibreglass panels found at home depot but seems
pretty messy to cut.
Adam
Get Outlook for Android <https://aka.ms/ghei36>
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
