Call riggingonly.com. See what they will do for you. With the rig down, you can measure everything and have them duplicate it. You cn also ship it to them for duplication.
Dennis C. On Mon, Apr 22, 2019, 10:00 AM Shawn Wright via CnC-List < cnc-list@cnc-list.com> wrote: > Hello all, > > The 35-2 we are about to purchase has standing rigging of unknown age, > although it appears to be solid. There is a fellow at the club where the > boat is currently located who does rigging, and is going to give me a > quote. As the boat is already being hauled and put on the hard for 2 weeks, > and the club has a mast crane, it seems like a good opportunity to get it > done, and also any work on the mast, check the keel bolt under the mast, > etc. The boat has dual forestays with furlers, single backstay with > hydraulic tensioner, and standard upper, fore & aft lower shrouds. Just > interested in what a ballpark cost should be, and how this would compare to > me ordering the wire are terminals and doing it myself. > > Also, the boat has 7 through hulls, all marelon which appear to be in > good condition, but some are a bit stiff. I'm assuming this is due to > growth inside and lack of exercise (current owner leaves them open it > seems). What is the recommended maintenance for these during a haulout? > > Thanks! > > -- > Shawn Wright > shawngwri...@gmail.com > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
