Try Rig Rite: https://www.rigrite.com/Spars/SparParts/MH_Spinnaker_bails.php <https://www.rigrite.com/Spars/SparParts/MH_Spinnaker_bails.php> They should have something that will fit your boat.
All the best, Mike Mike Brannon Virginia Lee 93295 C&C 36 CB Virginia Beach, VA > On Aug 8, 2019, at 6:10 PM, Luke Wolbrink via CnC-List > <cnc-list@cnc-list.com> wrote: > > Hello Folks, > > I'm considering simplifying things on my 35-3 and changing to an asymmetrical > system. I'm interested in any information from folks here that have done a > similar conversion: positives, negatives, cautionary tales? > > One thing I'm concerned about is that my mast does not have a crane, the > spinnaker halyards exit right next to the genoa halyard. If I add a top-down > furler I'm nervous everthing is gonna get a bit congested. Have any of you > added a masthead crane to move the halyards out a bit? > > Thanks in advance, > Luke > SV Zella C&C 35-3 > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray