Hi John, You need to allow access for us to view these photos. I just get this now:
You need permission Want in? Ask for access, or switch to an account with permission. Learn more <https://support.google.com/drive?p=requesting_access&hl=en> On Mon, 9 Sep 2019 at 13:08, John Conklin via CnC-List < cnc-list@cnc-list.com> wrote: > MY BAD clicked wrong pic sorry for all the emails this shows detail and > right side up ! > > https://drive.google.com/open?id=1hLgHDk50Ti3P04eJEoOSYVEmDF2EgmK9 > > > > John > > > ------------------------------ > *From:* CnC-List <cnc-list-boun...@cnc-list.com> on behalf of John > Conklin via CnC-List <cnc-list@cnc-list.com> > *Sent:* Monday, September 9, 2019 11:57:45 AM > *To:* cnc-list@cnc-list.com <cnc-list@cnc-list.com> > *Cc:* John Conklin <jconk...@hotmail.com> > *Subject:* Re: Stus-List hurricane check in > > > Sorry bad pic and upside down ! Not as bad as it looks in close up but > still not thrilled with damage > > Claimable? > > https://drive.google.com/open?id=1paHLQ1sTiUr26pIRLTZqLlxcrRUStXGD > > https://drive.google.com/open?id=1P6zbTSz5SfPGGWVtfYKYc5HjfTDt1Q25 > > https://drive.google.com/open?id=1P6zbTSz5SfPGGWVtfYKYc5HjfTDt1Q25 > > > > John Conklin > > Halcyon > > > > > ------------------------------ > *From:* CnC-List <cnc-list-boun...@cnc-list.com> on behalf of John > Conklin via CnC-List <cnc-list@cnc-list.com> > *Sent:* Monday, September 9, 2019 11:39:43 AM > *To:* cnc-list@cnc-list.com <cnc-list@cnc-list.com> > *Cc:* John Conklin <jconk...@hotmail.com> > *Subject:* Re: Stus-List hurricane check in > > > Hello all, > > I got a pretty good Boat Bite from the Piling Port side Entry Gate !! > There was an old bolt about 5 ft up on Piling that got Halcyon ☹ I had > no issue with this in Florence. However at my Marina in Oriental NC wind > swung around outta the west Friday for a solid 4 hrs with Gusts to 70 MPH > pushing her onto the piling. I was not set up (Good enough) for that > direction. I was planning on a 9 ft surge so may have left a bit too much > slack? lesson learned ! Will add Fender Board for the next one for sure !! > > > > I believe it just cosmetic but No idea how to repair. Will hit it with > hose to be sure joint was not compromised. > > I don’t think this is an easy repair? Someone mentioned I may be able to > add material to rail then sand it back to original ? > > Real bummer for sure, and an ugly scar! Its not like I had rights got T > boned … or any good stories to tell either… > > Just a bad Job on my part securing her. > > Pics here à > https://drive.google.com/open?id=1Fiuu9iTiGjT9gokV9MaOsE01Bgn4qb5V > > > > > > THANKS! > > > > John Conklin > > S/V Halcyon > > S/V Heart Beat > > > > > > > ------------------------------ > *From:* CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Della > Barba, Joe via CnC-List <cnc-list@cnc-list.com> > *Sent:* Monday, September 9, 2019 8:03:19 AM > *To:* cnc-list@cnc-list.com <cnc-list@cnc-list.com> > *Cc:* Della Barba, Joe <joe.della.ba...@ssa.gov> > *Subject:* Stus-List hurricane check in > > > Everyone OK? > > Not much happened here, 25 knots maybe. > > Joe > > Coquina > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
