Evan,

Replacing the lenses in the aluminum frames is straightforward.  I do it
every 7-8 years on my 35-1.  I cut the lenses myself from acrylic I get
from mcmaster.com.

First, the inner seal is simply D-shaped EDPM weatherstripping that can be
found at Lowes, Home Depot or Walmart.  MD Building Products and Frost King
make it.  Amazon sells it also.  Look for MD Building Products 1025
weatherstripping.

Clean the sealing surface on the aluminum frames and stick the adhesive
side to the frame.  Insert the lens.  Wet the spline with soapy water and
use a wooden dowel or similar to push the spline in place.

You can buy universal spline on amazon much cheaper than the spline sold by
Holland.  I used C.R. Laurence CRL gray 15/32 Wide glazing spline.
However, that spline was a bit hard to insert.  It worked but it was a bit
of a pain.

I suspect there are better spline/gasket alternatives out there.  The first
time I replaced them, I used the spline from Holland.  It worked very well.

Dennis C.
Touche' 35-1 #83
Mandeville, LA

On Thu, Sep 26, 2019, 11:11 AM Evan Kane via CnC-List <cnc-list@cnc-list.com>
wrote:

> The metal-framed windows on my 33-1 all leak, and the (vinyl?) spline is
> pulling away at the corners and looks bad. The leak is between the frame
> and the plexi, not the frame and the fiberglass.
>
> I’m aware that holland marine and south shore sell the spline but at
> relatively large expense.
>
> The local window shop didn’t have anything matching in stock but
> recommended picking something from CR Laurence’s options ($20-40 for a 100
> ft roll), but I can’t tell which would work best.
>
> What is the list using for replacement spline?
>
> Also, do you recommend butyl tape or 3m vhb tape or other products for
> sealing the plexi to the frame?
>
> Please excuse any technical errors using the list on my part, this is my
> first post (likely of many)
>
> Evan
>
>
>
> _______________________________________________
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to