Thanks! I will give that a go! I believe this is all original 1982 i was able 
to get stern, and port  but starboard is not budging so hopefully i can turn 
otherwise  will just to change to a new mount and lense

John Conklin
S/V Halcyon
www.flirtingwithfire.net


> On Mar 21, 2020, at 5:31 PM, James Nichols via CnC-List 
> <cnc-list@cnc-list.com> wrote:
> 
> John,
> 
> I've always drilled out the heads of the screws for any that are stripped
> and then once the lens is off, you should be able to grab the remainder of
> the screw with a set of needle nose vice grips to back it out.
> 
> Use a bit that is the same size as the body of the screw, not the size of
> the screw head.  The head should come off like a ring on the drill bit, and
> run the drill pretty slowly with good even pressure.
> 
> James
> SV Kristy
> 
> Message: 2
> Date: Sat, 21 Mar 2020 21:11:01 +0000
> From: John Conklin <jconk...@hotmail.com>
> To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
> Subject: Re: Stus-List Boat projects again- wire running through rail
>    tube
> Message-ID:
>    
> <bn6pr1301mb19391ba8a3297f0f5dceca8d9b...@bn6pr1301mb1939.namprd13.prod.outl
> ook.com>
>    
> Content-Type: text/plain; charset="utf-8"
> 
> Following as I cannot remove the lense on my bow light :( small top and
> bottom Phillips head are stripped. Even hit em with PB blaster This needs to
> come of  to get to 2 bolts the hold casing to pulpit.
> I have whole new  set up
> But hoping there may be a solution?  Before smashing it !
> 
> 
> John Conklin
> S/V Halcyon
> S/V Heartbeat
> www.flirtingwithfire.com
> 
> 
> _______________________________________________
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 

_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to