I cut mine off as well. A pinhole leak in one of the water hoses a few years ago melted everything into one solid rusty mess. New shaft, half the coupler, and put in a new cutless bearing just for fun. The 2018 project. Gary 1980 30-1 #593
-----Original Message----- From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of rick bushie via CnC-List Sent: Monday, June 1, 2020 8:01 AM To: cnc-list@cnc-list.com Cc: rick bushie <rickbushie...@gmail.com> Subject: Re: Stus-List Shaft coupler removal Josh, I had to cut mine off. Luckily, a ready replacement was available from Moyer Marine for my A4. Rick Bushie Anchovy 1971 30-1 Sent from my iPhone _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray