I used a sharp chisel to remove the old glue. There was a bit of damage where the gelcoat pulled off. I patched it with white epoxy filler and the new acrylic covered over all my shady filling and sanding.
Cheers, Al SV Elendil C&C 37/40+ > On Jun 2, 2020, at 3:18 PM, Peter Cowenhoven via CnC-List > <cnc-list@cnc-list.com> wrote: > > Steve, > > I'm in the process of doing this now without the metal frames that Leaky > Windows provides. I'm having two cut from 1/4 inch acrylic plexiglass grey > 2064 tint at a local glass shop in CT for a total of $500. I'm going to > affix it with 3M vhb tape and seal it with the Dow corning 795 black > silicone. The tricky part is getting the old brown adhesive off the gel > coat. It looks like it's going to pull up some of the gelcoat so there will > be some needed repair. > > Here is a good life link to the process. > https://youtu.be/MQyjxVUskd8 > > Sent from Yahoo Mail on Android > > On Tue, Jun 2, 2020 at 5:57 PM, Gerald Fennessey via CnC-List > <cnc-list@cnc-list.com> wrote: > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > > <Untitled> > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurrayn >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray