love, love, love, it! and I would love the info as well please great solution to the bit of crazing Assuming notpossible any water can be trapped below right ? This matches for me but curious Other colors available?
Thanks ! John Conklin S/V Halcyon S/V Heartbeat www.flirtingwithfire.com On Jun 15, 2020, at 11:31 AM, Paul Hood via CnC-List <cnc-list@cnc-list.com> wrote: Hey Richard, It is a Seadek product which I brought from Launch Marine in Hamilton Ontario. I sent them the templates using 6mil poly. I believe they sent the template to Florida or did the computer work themselves. Either way, the product came cut to shape from Seadek in Florida. It was about 1k Cdn and the installation was relatively easy, peel and stick. You only get one chance to stick so an extra pair of hands was necessary. They did straighten a few lines on the computer where I’m sure my template had slight curves but mostly unnoticeable. I had redone the gelcoat on the deck some years back and left the non-slit off in those areas. Apparently you can lay over non-slip but I wouldn’t do it. I decided to fine sand and polish around the visible foam prior to laying so as not to deal with that later and leave a clean edge. I did have non-slip on the 2 propane covers but sanded that down before installing. Not a big deal. It took about 4 hours to sand, polish and lay all panels. Before buying, I tested it by putting red wine on it, sat for 15 minutes, rubbed it in, and it rinsed right off. Quite impressed. It is not slippery and has cushion feel to it. Hoping to get some good life out of it. I got the light grey and the blue that matches my sunbrella blue. You can see the main cover in the photo that matches almost exactly. I wanted the lines on the floor but not the seat. I felt it was too much line and as well less comfortable to sit on. The logo was $50 cdn….I thought it was a nice touch. Hope that helps. Thanks, Paul Hood 416-799-5549 From: Richard Bush <bushma...@aol.com> Sent: June 15, 2020 11:10 AM To: cnc-list@cnc-list.com Cc: paul.h...@rogers.com Subject: Re: Stus-List Fun Work Paul, that looks awesome! tell me more about the product, the cost and the installation method...source of product? Thanks Richard s/v Bushmark4: 1985 C&C 37 CB; Ohio River, Mile 584; Richard N. Bush Law Offices 2950 Breckenridge Lane, Suite Nine Louisville, Kentucky 40220-1462 502-584-7255 _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray