Next easiest try. Replace the starter button switch On Sat, Aug 1, 2020 at 10:50 AM David Knecht via CnC-List < cnc-list@cnc-list.com> wrote:
> To be clear: > 1. No wiring harness- removed several years ago and replaced with direct > butt splices. > 2. The engine has started 100% of the time when cold and glow plug button > pushed before start button > 3. The two times it gave no response were warm engine with key off, turn > key on and immediately push start button. In both cases, second push of > start button a few seconds later started right up. > > That is why I was thinking that it was the delay between turning the key > on and pushing the start button was the only obvious difference between the > scenarios where it started vs. gave no response. I did not hear a click > when I pushed the button, but I suspect that between my being in the > cockpit (rather than near the starter), my hearing not being great and the > clicking of the fuel pump, I would likely would not be able to tell if it > clicked or not. I will do some more experimentation when I am next at the > boat. I will warm the engine and then turn the key off and wait various > times before pushing Start and see what happens. Dave > > S/V Aries > 1990 C&C 34+ > New London, CT > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > -- Sent from Gmail Mobile
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
