Nope, the halyards are run to blocks on the ring around the base of the mast, then to the winches (originally) on the dorade boxes. And the 30-1 has the tangs.
Gary 30-1 #593 From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of Hoyt, Mike via CnC-List Sent: Wednesday, August 12, 2020 9:23 AM To: 'cnc-list@cnc-list.com' <cnc-list@cnc-list.com> Cc: Hoyt, Mike <mike.h...@impgroup.com> Subject: Re: Stus-List 1979 C&C 34: why hangers on thru-deck mast fitting? Hi Glen I believe on C&C 30-1 the halyards are run at the mast not at the cockpit in factory configuration. Therefore no pulling upward on deck by halyard tensioning at mast collar Just my guess for whatever that is worth Mike Hoyt From: CnC-List <cnc-list-boun...@cnc-list.com <mailto:cnc-list-boun...@cnc-list.com> > On Behalf Of Glen Eddie via CnC-List Sent: August 12, 2020 9:49 AM To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> Cc: Glen Eddie <ged...@torkinmanes.com <mailto:ged...@torkinmanes.com> > Subject: Re: Stus-List 1979 C&C 34: why hangers on thru-deck mast fitting? I don’t have any hangers on my C&C 35 Mk I. Is there a reason why? Thanks in advance. Glen Eddie Tel: 416-777-5357 Fax: 1-888-812-2557 Torkin Manes LLP Barristers & Solicitors This email message, and any attachments, is intended only for the named recipient(s) above and may contain content that is privileged, confidential and/or exempt from disclosure under applicable law. If you have received this message in error, please notify the sender and delete this email message. Thank you.
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
