Josh, Great Job…………my next question is what was the process for measuring and procuring the replacement rod materials? Did the Yard do it, or a rigger in teharea, or other?
Thanks, Ron C. Impromptu 38MKIIC ‘77 From: Josh Muckley via CnC-List <cnc-list@cnc-list.com> Sent: Thursday, March 18, 2021 10:46 AM Cc: Stus-List <cnc-list@cnc-list.com>; Josh Muckley <muckl...@gmail.com> Subject: Stus-List Re: Recommended Masthead/Deck Light combo replacement [now mast rebuild] The yard used awlgrip 2000, pearl gray if I recall correctly. Stripped all hardware and wiring, welded shut vestigial holes, ground them flat and then primed and painted. Re-wired, refitted, replaced all rod rigging. Here is the link to the whole project. <https://drive.google.com/folderview?id=1eSqX7wZP1r77hD84wDmGAQSI0Tqbn9xm> https://drive.google.com/folderview?id=1eSqX7wZP1r77hD84wDmGAQSI0Tqbn9xm I pretty sure the next question is going to be "how much?" ~1k for each rod and hardware. I have 4 shrouds on each side plus head and back. 10 total ~3k for the paint job alone All said and done it came to roughly 20k Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Thu, Mar 18, 2021, 10:19 David Swensen <ka123dswense...@gmail.com <mailto:ka123dswense...@gmail.com> > wrote: Josh, Lets talk about your mast and spreaders. What did you use to paint them? They look great. On Thu, Mar 18, 2021 at 9:54 AM Josh Muckley via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: I replaced my Aqua Signal with the marine beam. Perfect replacement fit. No problem. Highly recommend. I also did Aqua Signal LEDs on the spreaders. Very low profile and they work phenomenally - almost too bright! https://store.marinebeam.com/led-masthead-foredeck-combination-light/ https://drive.google.com/file/d/1CdFzOH89I3fwlZeumTcWlLxQGST9Mn_S/view?usp=drivesdk https://drive.google.com/file/d/1gIzwa9aDe-08QwoXbRkiSKvJpeaHpOkU/view?usp=drivesdk https://drive.google.com/file/d/1ZQiyoFpaXQ5qMJ82CfCZY1GUoUKmx-MM/view?usp=drivesdk https://drive.google.com/file/d/1C9XMVAymHLr3240v5wFePlXiVGKJG6VS/view?usp=drivesdk All the best, Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Thu, Mar 18, 2021, 08:55 Danny Haughey via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: Hello all, I need to replace my masthead (steaming)/Deck Light. The existing Aqua Signal light doesn't impress me as the deck light lens fell off at some point and the deck light didn't work. So, Staying away from Aqua Signal. I've been looking and these light range in price from around $100 all the way up to well over $500. I've seem Marine Beam, with good reviews, at about $125 and the Signal Mate, with good reviews at about $450. I don't want to spend unnecessarily but, I'm leaning toward the Signal Mate. It was good reputation, been around a while and is supposed to be well made. Of course the reviews on the Marine beam say they are well made. There are plenty of bad reviews about the aqua signal. I was hoping some of you could offer some experiences and advise. Thanks, Danny Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
