Biggest problem with some sealants/adhesives like 5200 for exterior use is sunlight or uv exposure. Best thing I have found to clean the rub rail is an acetone dampened rag. So far no detrimental effect on Alianna’s rub rail that i can see.
On Sat, May 8, 2021 at 3:49 PM Bill Coleman via CnC-List < cnc-list@cnc-list.com> wrote: > Looks like it might make a nice mast boot. > > The biggest problem with sealers and adhesives (like 5200) is they get > dirty, and seem to attract discoloration. > > Be interesting to see how it holds up for you, you have a good environment > for testing. > > > > But, wait, wait, isn’t there more? > > > > > > Bill Coleman > > Entrada, Erie, PA > > > > > > > > *From:* Dennis C. via CnC-List [mailto:cnc-list@cnc-list.com] > *Sent:* Friday, May 07, 2021 8:23 PM > *To:* CnClist > *Cc:* Dennis C. > *Subject:* Stus-List Rub rail gouge repair > > > > FWIW, I've been working on repairing some deep gouges in Touche's rub rail > from Hurricane Sally last year. The idea was to fill the gouges with some > sort of white "stuff" and then wet sand it. > > > > What didn't work: 3M 5200. 100% fail. Not only didn't it sand well, it > didn't adhere to the rubber rub rail. Just balled up and rubbed off. > > > > What did seem to work: white Flex Paste (not Flex Seal). It actually > stuck well to the rub rail and sanded well. Took a lot of elbow grease to > wet sand but the final result seems to pass the 10 foot test. It's a LOT > of work, however. Initial sand to shape with 220 then progressively > finer. > > > > https://www.flexsealproducts.com/product/flex-paste/ > > > > I also found that lightly wet sanding with 800-1000 grit restores the > white rubber. That question has appeared on this list many times. I've > never liked any of the suggested chemical or solvent solutions. Not overly > happy about wet sanding it either but might actually be less damaging than > chemicals. > > > > Your experience may vary. > > > > -- > > Dennis C. > > Touche' 35-1 #83 > > Mandeville, LA > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu -- Sent from Gmail Mobile
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu