Be advised, Gel coat is Polyester based and will not adhere to epoxy, but epoxy will adhere to polyester and or vinyl ester based fiberglass. Gel coat will also work with vinyl ester based fiberglass.
Doug On Sun, May 23, 2021 at 8:17 AM Graham Collins via CnC-List < cnc-list@cnc-list.com> wrote: > Hi Adam > > Burnside Fiberglass loaned me the color cards to compare to my gelcoat, > for best results you might want to ask them if they still do that. I can > tell you what my can of gelcoat is marked (or you could try some if you > want, it isn't like I'll use it all...). I'm at AYC, where are you located? > > Graham Collins > Secret Plans > C&C 35-III #11 > > On 2021-05-23 10:23 a.m., Adam Hayden via CnC-List wrote: > > Hello > > I am sure this has been asked before. Has anyone produced the colour > charts for gelcoat repair? I replaced a number of stanchion bases and now > have some holes to repair. (I have the epoxy etc just looking for the final > topcoat to match the rest of the deck) > Our decks are that slightly off-white light beige colour. > > I am in Nova Scotia so may try Burnside Fibreglass. > > Thanks > > Adam > C&C 36 > State of Bliss > > Sent from my Bell Samsung device over Canada’s largest network. > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu -- Douglas Mountjoy 253-208-1412 Port Orchard YC, WA Rebecca Leah C&C LandFall 39
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu