Thanks everyone. I appreciate the responses Adam Sent from my Bell Samsung device over Canada’s largest network.
________________________________ From: Rod Stright via CnC-List <cnc-list@cnc-list.com> Sent: Sunday, May 23, 2021 4:55:19 PM To: 'Stus-List' <cnc-list@cnc-list.com> Cc: Rod Stright <strig...@eastlink.ca> Subject: Stus-List Re: Gelcoat colour matching I have a 2004 C&C 99 which has a vacuum bagged epoxy hull. The finish is a polyester gel coat. Here is a quote from Tim Jackett the designer from Tartan Yachts who built the boat “The gelcoat is NPG Isothalic, which is a polyester product.” So obviously it can be done with the proper preparation. The finish sill looks like new. Rod Stright Sail Safe, Rod Stright [cid:image001.png@01D74FF4.694568D0] President C&C 99 Class Association Halifax Nova Scotia From: dwight veinot via CnC-List <cnc-list@cnc-list.com> Sent: May-23-21 4:32 PM To: Stus-List <cnc-list@cnc-list.com> Cc: dwight veinot <dwight...@gmail.com> Subject: Stus-List Re: Gelcoat colour matching Are you totally sure about that On Sun, May 23, 2021 at 12:55 PM Doug Mountjoy via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Be advised, Gel coat is Polyester based and will not adhere to epoxy, but epoxy will adhere to polyester and or vinyl ester based fiberglass. Gel coat will also work with vinyl ester based fiberglass. Doug On Sun, May 23, 2021 at 8:17 AM Graham Collins via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Hi Adam Burnside Fiberglass loaned me the color cards to compare to my gelcoat, for best results you might want to ask them if they still do that. I can tell you what my can of gelcoat is marked (or you could try some if you want, it isn't like I'll use it all...). I'm at AYC, where are you located? Graham Collins Secret Plans C&C 35-III #11 On 2021-05-23 10:23 a.m., Adam Hayden via CnC-List wrote: Hello I am sure this has been asked before. Has anyone produced the colour charts for gelcoat repair? I replaced a number of stanchion bases and now have some holes to repair. (I have the epoxy etc just looking for the final topcoat to match the rest of the deck) Our decks are that slightly off-white light beige colour. I am in Nova Scotia so may try Burnside Fibreglass. Thanks Adam C&C 36 State of Bliss Sent from my Bell Samsung device over Canada’s largest network. Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu -- Douglas Mountjoy 253-208-1412 Port Orchard YC, WA Rebecca Leah C&C LandFall 39 Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu -- Sent from Gmail Mobile
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu