I never use lubricant on mine. Just water wash On Mon, Jul 12, 2021 at 4:15 PM Joe Della Barba via CnC-List < cnc-list@cnc-list.com> wrote:
> What did you use for lube? (for the FURLER!!!!!!) > > > > > > Joe Della Barba > > Coquina C&C 35 MK I > > Kent Island MD USA > > > > > > > > *From:* Dave S via CnC-List <cnc-list@cnc-list.com> > *Sent:* Friday, July 9, 2021 8:43 PM > *To:* Stus-List <cnc-list@cnc-list.com> > *Cc:* Korbey Hunt <kampf2...@hotmail.com>; Dave S <syerd...@gmail.com> > *Subject:* Stus-List Re: Old Harken Roller II > > > > Yes. I puzzled over this for 2 seasons, and experimented with ineffective > solutions until I f inally, seriously, cleaned and lubricated the head > swivel while catching up on maintenance stuff. I did not connect this > with the wrapping at all as > > It had always seemed to turn very freely however it turns out it was > binding under heavy load. > > I had checked it but could not replicate without the sail set so I could > never actually see the cause. It was Dangerous at times and just a real > hassle other times. > > After cleaning and lubricating the swivel, it spins even more freely, a > noticeable difference once you have a comparison. > > Hasn’t jammed or wrapped since. > > > > Dave > > > > 33-2 > > > > Sent from my iPhone > > > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu -- Sent from Gmail Mobile
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
