All,
Much has been written about the problem of wet balsa when and if it
happens and I have seen many methods better and worse for deck repairs.
What I have not seen are examples of how people have gone about
repairing wet cored areas of the hull. Any pointers other than "forget
about it" would be appreciated.
Steve Thomas
------ Original Message ------
From: cnc-list@cnc-list.com
To: cnc-list@cnc-list.com
Cc: joe.della.ba...@ssa.gov; strig...@eastlink.ca
Sent: Friday, September 17, 2021 1:32 PM
Subject: Stus-List Re: [EXTERNAL] Re: Balsa core history
Yes that old foam is crap. The new Coosa
https://coosacomposites.com/the-coosa-advantage/
<https://coosacomposites.com/the-coosa-advantage/> and equivalents do
not soak up water and are put together under tons of pressure.
From: Della Barba, Joe via CnC-List <cnc-list@cnc-list.com>
Sent: September-17-21 11:21 AM
To: Stus-List <cnc-list@cnc-list.com>
Cc: Della Barba, Joe <joe.della.ba...@ssa.gov>
Subject: Stus-List Re: [EXTERNAL] Re: Balsa core history
Typo
Water migrates slowly through end-grain balsa but really tears foam up
-------------------------------------------------------
Snip snip snip
--------------------------------------------------------
Great info and research; so, how did balsa go from "wonder" material to;
"bad stuff don't touch..."?
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution -- https://www.paypal.me/stumurray Thanks - Stu