Why do you need the DC-DC Charger? I am thinking about this too. I need to replace my Heart Inverter/Charger, so there is that. I have fairly new Balmer Regulators, so I am pretty sure they have a lithium battery setting. Also, I am on 24 Volt, so if it is available would there be an advantage to using 24V instead of putting 12V in series?
Bill Coleman Entrada, Erie PA On Mon, Jul 25, 2022 at 2:13 PM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > My battery charger does have a lithium setting, so that part is covered. > > What I don’t have is the DC-DC charger I’ll need to charge lithium from > the engine bank. > > > > > > *Joe Della Barba* > > Coquina > > > > *From:* Chris Riedinger via CnC-List <cnc-list@cnc-list.com> > *Sent:* Monday, July 25, 2022 12:48 PM > *To:* Stus-List <cnc-list@cnc-list.com> > *Cc:* Chris Riedinger <chris.riedin...@gmail.com> > *Subject:* Stus-List Re: [EXTERNAL] Re: No recent mail - now alternator > belt > > > > Why not just get a solar panel and some AGM batteries? Lithium requires > new charger, AGM profile for charging is often available on legacy > chargers. > > > > On Mon, Jul 25, 2022, 6:28 AM Della Barba, Joe via CnC-List < > cnc-list@cnc-list.com> wrote: > > To add to my fun it was about sunset and my batteries are about shot. I > had 16 miles to go and didn’t want run on battery power, so digging through > my spare belts it turns out they were all too short ☹ I had to swap > alternators back to the one that uses the shorter belts, so a 10 minute job > became quite a bit longer. > > I think I need to quit researching lithium batteries for the 25th time > and just pick one! > > > > > > *Joe Della Barba* > > *Coquina* > >