That's good info Neil, thanks!
On Sep 17, 2022 12:05 PM, Neil Gallagher via CnC-List <cnc-list@cnc-list.com> wrote:
My info might be a bit old but when I bought my boat it had been in Somerset Marina for 3 yrs on the hard. It was marginal for a 35' sailboat, could only launch at high tide, had to bring in an outside crane to hoist a mast more than 50'. On the other hand it was a good place for DIY, they didn't care what you did on the boat. The yard crew was good, the owner bit of a crank. Use with caution, I guess.
Neil Gallagher
Weatherly, 35-1
Glen Cove, NY
On 9/17/2022 11:53 AM, Andrew Burton via CnC-List wrote:
No. I don't know anything about any of these yards except that they aren't owned by Safe Harbor.Andy
Andrew Burton
26 Beacon Hill
Newport, RI
USA 02840
http://sites.google.com/site/andrewburtonyachtservices/
phone +401 965 5260
On Sat, Sep 17, 2022 at 11:49 AM Danny Haughey via CnC-List <cnc-list@cnc-list.com> wrote:
Thanks Andy! Taunton river sounds convenient for winter work! Close to the house!
I was also considering somerset marina on the Taunton River. Any thoughts on that facility?
On Sep 17, 2022 11:14 AM, Andrew Burton via CnC-List <cnc-list@cnc-list.com> wrote:
Danny,Check out Stanley's in Bristol and Shaws, O'connell's and Bristol Marine up the Taunton River. I think everything else in Narragansett Bay is owned by Safe Harbor.Andy
Andrew Burton
26 Beacon Hill
Newport, RI
USA 02840
http://sites.google.com/site/andrewburtonyachtservices/
phone +401 965 5260
On Sat, Sep 17, 2022 at 10:36 AM Danny Haughey via CnC-List <cnc-list@cnc-list.com> wrote:
Hello all,Was wondering if anyone had any suggestions for winter storage somewhere around Buzzards Bay. Narragansett bay is an option too.
The yard I was using needs to drop the mast and they can be a little clumsy. They've damaged my boat several times in their handling and I've done a massive amount of cosmetic work over the last couple of years that I'd like to protect.
I've also just completely rehabbed the mast. So, dropping it seems like a waste of effort and cost right now. So, I'd like to find a mast up solution if possible.
Thanks for any insights anyone can offer!
DannyRum Runner IVT40Mattapoisett MA