So the problem has not recurred in several hours of motoring over a few days so i am going to write it off as launch day blues. No water in separator. Fuel pressure gauge normal. I cant see that i can do anything about it unless it keeps happening. Thanks for the ideas. Dave
Sent from my iPhone On Jun 9, 2023, at 11:41 AM, Dreuge via CnC-List <cnc-list@cnc-list.com> wrote:
I once had a similar engine issue. It would run fine one day (or half) and constant stall upon or shortly after restarts. It turned out that my Racor was not full tightened. Easy fix once found.
- Paul E. 1981 C&C Landfall 38 S/V Johanna Rose Fort Walton Beach, FL
http://svjohannarose.blogspot.com/
On Jun 9, 2023, at 11:27 AM, ALAN BERGEN via CnC-List <cnc-list@cnc-list.com> wrote:
I am out for the first time this season. Engine started right up. Motored out of harbor for two hours. Turned engine off for a while waiting for wind. Started back up. Ran for 15-30 sec and died. Started up and ran for a bit longer then died. Pulled bed to get access and fuel pressure and level in racor look fine. Started up and ran fine for 40 min. WTF? Dave
Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at:https://www.paypal.me/stumurrayThanks for your help.Stu
|
Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make a contribution at:
https://www.paypal.me/stumurray
Thanks for your help.
Stu