37+ doesn't have conduits. Well mine didn't Aug 3, 2023 19:20:04 Doug Mountjoy via CnC-List <cnc-list@cnc-list.com>:
> I'm replacing the cables on my Edson Steering. The chain is in excellent > condition. But the cables and the conduit showed signs of wear. I can't > inspect the cables, and once pulled out of the conduit they won't go back in > if there is any bend to the cable. > I used 1\4 SS 304 7x19 cable, 4 aluminum crimp ferrels and 2 1\4 inch > thimbles. All sourced from Tacoma Screw. Total cost was less than $100. The > new conduits from Edison was a different story. $$$. > > > > > Douglas Mountjoy > 1988 C&C LF 39 > Mexico at large > 1984 Sabre 34 > Port Orchard, WA > > > On Thu, Aug 3, 2023, 12:46 Peter Fell via CnC-List <cnc-list@cnc-list.com> > wrote: >> I noticed when visiting a local (Victoria BC) used and consignment shop that >> they had an Edson cable / chain kit on the shelf. Other than a quick look I >> didn't pay too much attention (obviously cable diameter was too large for my >> 27) but if you are interested I could explore further. >> >> Peter >> >> On Tue., Aug. 1, 2023, 12:55 p.m. Rob Hamlin via CnC-List, >> <cnc-list@cnc-list.com> wrote: >>> Thinking about my my off season punch list. >>> >>> Steering system is next up, after motor mounts and running gear last year. >>> >>> Any idea on cable and idlers required? >>> >>> Thanks >>> Rob >>> >>> Sent from my iPhone >>> Please show your appreciation for this list and the Photo Album site and >>> help me pay the associated bills. Make a contribution at: >>> https://www.paypal.me/stumurray >>> Thanks for your help. >>> Stu >> Please show your appreciation for this list and the Photo Album site and >> help me pay the associated bills. Make a contribution at: >> https://www.paypal.me/stumurray >> Thanks for your help. >> Stu
Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at: https://www.paypal.me/stumurray Thanks for your help. Stu