acassis opened a new pull request, #20751:
URL: https://github.com/apache/nuttx/pull/20751
## Summary
These commits add support to WiFi Halow on NuttX.
It was tested using Seeed Studio WiFi Halow Module (Quectel FGH100M-H) and
WeAct STM32H743 board.
## Impact
Users will be able to use WiFi Halow on NuttX
## Testing
```
nsh> ifconfig wlan0 up
nsh> wapi scan wlan0
bssid / frequency / signal level / encode / ssid
1c:bc:ec:30:f7:fb 9.035e+08 -14 0800 silex-ap
nsh> wapi psk wlan0 mypassphrase 3 3
nsh> wapi essid wlan0 silex-ap 1
nsh> renew wlan0
nsh> ifconfig
wlan0 Link encap:Ethernet HWaddr 68:24:99:44:6b:6b at RUNNING mtu 1500
inet addr:10.0.3.245 DRaddr:10.0.0.1 Mask:255.255.240.0
nsh> ping -c 3 10.0.0.1
PING 10.0.0.1 56 bytes of data
56 bytes from 10.0.0.1: icmp_seq=0 time=10.0 ms
56 bytes from 10.0.0.1: icmp_seq=1 time=10.0 ms
56 bytes from 10.0.0.1: icmp_seq=2 time=0.0 ms
3 packets transmitted, 3 received, 0% packet loss, time 3030 ms
rtt min/avg/max/mdev = 0.000/6.666/10.000/4.714 ms
nsh>
```
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: [email protected]
For queries about this service, please contact Infrastructure at:
[email protected]
