On Sunday, September 8, 2002, at 05:01 PM, Jan Kistemaker wrote:
> For me too ;-) Always the hardest part for me. I've cut out the > rectangular > 'strips' with the ports from both cases, planning to glue the 475 bit > into > the hole in the 512k's case. But the chassis seems to slope a little > towards > the back, so the ports end up extremely 'low'. Perhaps I'll have to > adjust > the chassis somewhat, in order to have the ports where I want them. > And another thing: it would of course be a lot neater to have the > monitor > cable directly soldered to the mobo, but I don't have the pinouts nor > the > necessary experience/skill with a soldering iron. So the cable is still > running round the back :-( > For me too, ;-) The easiest bits are always the hardest. Does you display fill the full width of the screen? If so, are you refreshing at 60Hz or 647Hz? Stuart -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
