Here's the info from the remote
[parker@rcvrd ~]$ concordance -iv
Concordance 1.2
Copyright 2007 Kevin Timmerman and Phil Dibowitz
This software is distributed under the GPLv3.
Requesting identity: 100% done
Model: Logitech Harmony 880 (Espresso)
Skin: 15
Firmware Version: 4.4
Firmware Type: 0
Hardware Version: 1.8.0
External Flash: 2 MiB - 01:49 AMD Am29LV160BB
Architecture: 8
Protocol: 8
Manufacturer: Harmony Remote 0-4.4.2
Product: Harmony Remote 0-4.4.2
IRL, ORL, FRL: 0, 0, 0
USB VID: 046D
USB PID: C110
USB Ver: 080F
Serial Number: {EEEEEEEE-EEEE-EEEE-EEEE-EEEEEEEEEEEE}
{2819984D-F05A-4EE5-9FA9-C815851DFA4E}
{863D7E6E-17B4-4D95-A794-84207A436408}
Config Flash Used: 19% (372 of 1920 KiB)
Success!
On Tue, Dec 29, 2015 at 11:34 PM, Parker Reed <parker.l.r...@gmail.com>
wrote:
> I registered on the old site, it gave me a Connectivity.EZHex file,
> flashed it successfully, setup a TV on the website, gave me another
> Connectivity.EZHex, flashed successfully, but now when I try to flash the
> Update.EZHex it gives me it errors out after verifying every time.
>
> Remote is sitting in the dock and connected to computer. Tried out of dock
> with same results. Libconcord and Concordance from git.
>
> [parker@rcvrd ~]$ concordance -v Downloads/Update.EZHex
> Concordance 1.2
> Copyright 2007 Kevin Timmerman and Phil Dibowitz
> This software is distributed under the GPLv3.
>
> Requesting identity: 100% done
> Contacting website: 100% done
> Initializing update: 100% done
> Invalidating flash: 100% done
> Erasing flash: 100% done
> Writing config: 100% 371 KiB done
> Verifying config: 100% 371 KiB done
> Failed to upload config: Unknown error
> Failed with error -1
>
> -Parker Reed
>
>
>
------------------------------------------------------------------------------
_______________________________________________
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel
