Doesn't hit the reset cycle. Immediately dies after verifying.
Manual reset worked. So might be an issue with the verification.
On Wed, Dec 30, 2015 at 12:34 AM, Scott Talbert <s...@techie.net> wrote:
> Interesting. So it appears that the failure is happening when we are
> trying to reset the remote or reconnect to it after the reset. When using
> the USB 2.0 port, do you see the remote resetting (ie, the screen goes
> blank, starts booting up, etc)?
>
> Also, when using the USB 2.0 port, can you reset the remote successfully
> using 'concordance -r'?
>
> Scott
>
> On Tue, 29 Dec 2015, Parker Reed wrote:
>
> > Well that's interesting. Tried in a USB 3.0 port instead of 2.0 and it
> > worked!
> >
> > On Tue, Dec 29, 2015 at 11:37 PM, Parker Reed <parker.l.r...@gmail.com>
> > wrote:
> > Here's the info from the remote
> >
> > [parker@rcvrd ~]$ concordance -iv
> > Concordance 1.2
> > Copyright 2007 Kevin Timmerman and Phil Dibowitz
> > This software is distributed under the GPLv3.
> >
> > Requesting identity: 100% done
> > Model: Logitech Harmony 880 (Espresso)
> > Skin: 15
> > Firmware Version: 4.4
> > Firmware Type: 0
> > Hardware Version: 1.8.0
> > External Flash: 2 MiB - 01:49 AMD Am29LV160BB
> > Architecture: 8
> > Protocol: 8
> > Manufacturer: Harmony Remote 0-4.4.2
> > Product: Harmony Remote 0-4.4.2
> > IRL, ORL, FRL: 0, 0, 0
> > USB VID: 046D
> > USB PID: C110
> > USB Ver: 080F
> > Serial Number: {EEEEEEEE-EEEE-EEEE-EEEE-EEEEEEEEEEEE}
> > {2819984D-F05A-4EE5-9FA9-C815851DFA4E}
> > {863D7E6E-17B4-4D95-A794-84207A436408}
> > Config Flash Used: 19% (372 of 1920 KiB)
> >
> > Success!
> >
> >
> >
> > On Tue, Dec 29, 2015 at 11:34 PM, Parker Reed
> > <parker.l.r...@gmail.com> wrote:
> > I registered on the old site, it gave me a
> > Connectivity.EZHex file, flashed it successfully, setup a
> > TV on the website, gave me another Connectivity.EZHex,
> > flashed successfully, but now when I try to flash the
> > Update.EZHex it gives me it errors out after verifying
> > every time.
> >
> > Remote is sitting in the dock and connected to computer. Tried
> > out of dock with same results. Libconcord and Concordance from
> > git.
> >
> > [parker@rcvrd ~]$ concordance -v Downloads/Update.EZHex
> > Concordance 1.2
> > Copyright 2007 Kevin Timmerman and Phil Dibowitz
> > This software is distributed under the GPLv3.
> >
> > Requesting identity: 100% done
> > Contacting website: 100% done
> > Initializing update: 100% done
> > Invalidating flash: 100% done
> > Erasing flash: 100% done
> > Writing config: 100% 371 KiB done
> > Verifying config: 100% 371 KiB done
> > Failed to upload config: Unknown error
> > Failed with error -1
> >
> > -Parker Reed
> >
> >
> >
> >
> >
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> concordance-devel mailing list
> concordance-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/concordance-devel
>
------------------------------------------------------------------------------
_______________________________________________
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel
