Hi Geoffroy, try the last compat wireless package which works well with the WUSB600N USB dongle. http://www.orbit-lab.org/kernel/compat-wireless-3-stable/v3.1/compat-wireless-3.1-rc8-1.tar.bz2 . The older drivers have problems with your RT3572 chipset. If it doesn't work try another firmware from the Ralink website : http://www.ralinktech.com/en/04_support/support.php?sn=501 the firmware V22 seems to be the good one. ( replace /lib/rt2870.bin)
Regards, Julien 2011/10/12 VanCutsem, Geoffroy <geoffroy.vancut...@intel.com> > Hi Samuel, > > > -----Original Message----- > > From: Samuel Ortiz [mailto:sa...@linux.intel.com] > > Sent: Wednesday, October 12, 2011 3:02 PM > > To: VanCutsem, Geoffroy > > Cc: connman@connman.net > > Subject: Re: Setting up WiFi tethering in MeeGo 1.2 > > > > Hi Geoffroy, > > > > On Wed, Oct 12, 2011 at 12:32:45PM +0000, VanCutsem, Geoffroy wrote: > > > Hi all, > > > > > > I can't seem to be able to get tethering to work in MeeGo IVI 1.2. I > > have been testing with a WUSB54GC ver. 3 and a Linksys WUSB600N USB > > WiFi stick. Here is what I have done/checked: > > > - Downloaded, compiled and installed the following package (to use > > the rt2800usb driver): http://www.orbit-lab.org/kernel/compat-wireless- > > 2.6-stable/v2.6.37/compat-wireless-2.6.37-4-sn.tar.bz2 > > > - Checked the kernel config to make sure CONFIG_BRIDGE=y > > > - Checked the wpa_supplicant is built with CONFIG_AP=y > > > > > > I am running MeeGo 1.2 IVI (based on 1.2.0 and 1.2.0 Updates) but I > > have also tried with the latest Connman (0.77) but I'm always getting > > the same error when running the enable-tethering script (e.g.: > > ./enable-tethering wifi geoffroy 123456789 -> returns > > 'dbus.exceptions.DBusException: net.connman.Error.NotSupported: Not > > supported'). > > > > > > There are also some errors logged in connman log file that are marked > > as Critical (see attached for the log file). > > > > > For some reasons it seems your wifi interface is not enabled. > > Could you please share your wpa_supplicant logs as well (maybe with > > your > > wpa_supplicant .config file). > > Here is the wpa_supplicant log file. It looks indeed like there is > something wrong with my driver. I have attached the following output: > - wpa_supplicant log file > - dmesg > - lsmod > - wpa_supplicant.config > > > > > Cheers, > > Samuel. > > > > -- > > Intel Open Source Technology Centre > > http://oss.intel.com/ > > Cheers, > Geoffroy > Intel Corporation NV/SA > Kings Square, Veldkant 31 > 2550 Kontich > RPM (Bruxelles) 0415.497.718. > Citibank, Brussels, account 570/1031255/09 > > This e-mail and any attachments may contain confidential material for the > sole use of the intended recipient(s). Any review or distribution by others > is strictly prohibited. If you are not the intended recipient, please > contact the sender and delete all copies. > > _______________________________________________ > connman mailing list > connman@connman.net > http://lists.connman.net/listinfo/connman > _______________________________________________ connman mailing list connman@connman.net http://lists.connman.net/listinfo/connman