On Wed, 4 Jun 2003, Isaac wrote: > Just to share the experience... > > Moving the drive to the ATA-66 bus allowed me to complete the install and then > boot it up. XFDrake then got the GUI working (but now the consoles are > invisible if XFree is up, odd) > > Note: there appears to be a bug in the text installer because I selected the > benh kernel (in individual package selection), but it was not installed. I > had to install it later with rpmdrake. >
Yes. Reported several times. I don't believe any manual package selections in text install actually happen. > Now the next step is to move the drive back to the Ultra ATA bus. This will > change the drive from /dev/hda to /dev/hde. > > so to get past this, i have to change yaboot.conf to reflect the change in > device and make the benh kernel default, change the open firmware > boot-device, and /etc/fstab ... did i miss anything? > Sounds right. -- Stew Benedict -- MandrakeSoft PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 IRC: irc.freenode.net #cooker-ppc Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2