On Mon, Aug 02, 2010 at 01:20:54PM +0200, Stefan Reinauer wrote: > > On 02.08.2010, at 12:43, xdrudis <xdru...@tinet.cat> wrote: > > > On Mon, Aug 02, 2010 at 11:54:15AM +0200, Rudolf Marek wrote: > >>> When I boot with the propietary BIOS I can get GRUB2 and linux console > >>> on the serial port, but only at 38400 bps. 118000 does not work. So > >>> I've put 38400 in kconfig too. > >> > >> > >> Hm this is strange. Maybe you can try with 9600 ? > > > > I'll try. Since docs say 118000 I thought the furthest from that the > > worst, so I didn't try. > > Sure it's not 115200? 118000 sounds very unusual. > > Stefan >
Mph. :-( I feel more stupid than usual. Sorry for the noise. I just tried again with 115200 and grub 2 and linux console work with the propietary BIOS. I don't know what I did wrong the first time... The only thing I find different is that now I'm using ssh to access the other side of the null modem cable (an EPIA-M computer) and the other time I was using the keyboard at the EPIA-M console. I must have done some silly mistake the other time. But coreboot won't work yet at 9600, 38400 nor 115200 (I've rechecked I din't had the it8712f_24mhz_in call ). I'm going to try serialICE next. Thanks. -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
