On Wed, Nov 3, 2010 at 3:34 PM, Rudolf Marek <r.ma...@assembler.cz> wrote: > Hi Scott, > > I tried to boot with that on famF CPU and it went well. > ruiktest:~# > ruiktest:~# lspci -vvv -s 01:05.0 > > 01:05.0 VGA compatible controller: ATI Technologies Inc RS880 [Radeon HD > 4200] (prog-if 00 [VGA controller]) > Subsystem: ATI Technologies Inc Device 0000 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] > Region 1: I/O ports at 1000 [size=256] > Region 2: Memory at f8100000 (32-bit, non-prefetchable) [size=64K] > Region 5: Memory at f8000000 (32-bit, non-prefetchable) [size=1M] > Expansion ROM at <unassigned> [disabled] > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Kernel driver in use: radeon > > The BAR seems to be enabled. Btw I tried to boot Win7 but still got only > logo animation forever. Not sure what it could be. > > I agree that this patch is big improvement. We can fix the MMCONF later.
Was that an ack? Maybe I misunderstand, but I don't think that there is an MMCONF issue. The bar disable prevents the 780 MMCONF from being moved, right? Just curious, have you test this with Linux? I tried to load win7, but got a ACPI stop 0xA5. I suspect that my tables are not working at all. This is on iei kino. I will investigate more tomorrow. Marc -- http://se-eng.com -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot