----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Lynn; I have seen a lot of the problems you are talking about. If your engine does not want to start hot, it is in most of the time bad, braking down coils in the mags, when they are hot inside they will fuse together inside and will cause a weaker spark. After your engine is hot and not starting, get someone to crank it over with plug out and check the spark on both mags, if you have a weak are no spark this is the problem. I think turning the idle jet screw is not the answer. Also make sure the intake hoses are tight. No air intake leaks. Crank engine let run for one minute, put hands on each cylinder to see if they all have the same temp, if one is hoter it may have a air intake leak. ===== HAVE A NICE DAY; Jim Howell Uptight 39 Gruman OV-1 Mohawker Paris, Texas --- Hallandale, Florida __________________________________________________ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ ==^================================================================ EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT Or send an email To: [EMAIL PROTECTED] This email was sent to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
