After you have read the replies to your initial question, I am sure that
you must be quite confused. Let me try to more correctly find an answer
that may make sense.
There are two possible development 'routes' in darktable. 1.) uses the
'base curve'; 2.) uses the 'filmic-rgb' module.
If you use the base-curve approach .. this module designed to
approximate a camera jpg and is not normally modified by the uses. If
you wish to modify the effects of the base-curve then you should be
using the tone-curve to make corrections as needed.
Patrick has been advocating that you use the filmic-rgb approach (a more
recent darktable development); in which case the base-curve should be
switched off totally and then all/most of the adjustment will be done
within filmic-rgb.
I would strongly recommend that you familiarize these processes through
the excellent manual or the numerous videos that are available on-line.
David
On 2020-07-27 8:18 a.m., Patrick Shanahan wrote:
* Mikael Ståldal <mik...@staldal.nu> [07-27-20 10:50]:
I use Darktable 3.0.2 (the latest version as far as I know).
I have read about the base curve module in the user manual. I understand the
mechanics about changing the curve, but the whole concept is very abstract
to me.
On 2020-07-27 16:26, Patrick Shanahan wrote:
* Mikael Ståldal <mik...@staldal.nu> [07-27-20 10:16]:
I have enabled the base curve with preset "sony alpha like" (since I have
Sony cameras), and that is better than without.
But I have a hard time understanding how to manually edit the base curve in
a useful way. I can edit it, and I see how the image changes, but it feels
quite random to me. I don't know what to do to get the result I want.
Most of the presets are for specific camera makers, so it's hard to know
which one to chose. Does it even make sense to use a preset for another
camera than the one taking the photo?
On 2020-07-26 00:55, Terry Pinfold wrote:
·A base curve is applied automatically but if you look in the preset
options you may find another you prefer. You can also create your own
for future use.
you don't say what version dt you employe but a better approach would be
to enable filmic and follow:
https://discuss.pixls.us/t/darktable-3-0-for-dummies-in-3-modules/15849
as advised in this thread.
about base curve:
https://www.darktable.org/usermanual/en/modules.html
3.4.1.4.Base curve
fwiw, I have filmic enabled.
aiui, base curve matched exactly to your camera/model is an effort to display
a basically acceptable jpg image "resembling" but not matching your
"basic" ooc image. imnsho, you would be better served employing filmic
and disabling base curve.
____________________________________________________________________________
darktable user mailing list
to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
