Hi Subbrathnam,

The only difference I feel is that I used a thumb USB Memory, which is
SanDisk cruzer micro 1.0GB, and you used USB HDD.

I can't understand Why? my read speed is so high, and why the write
speed so low.

I'll try the USB hdd when I get one.

Good Luck.

2008/5/31, Subbrathnam, Swaminathan <[EMAIL PROTECTED]>:
> Lee,
>
>  On the TI DaVinci EVM I am consistently getting around 4-6MBps throughput 
> writing to the USB HDD's under DMA mode.
>
>  Many more MUSB fixes need to be done still compared to the 2.6.10 kernel 
> MUSB driver.  I am planning to do the same gradually as seperate patches.
>
>  Any way I can reproduce your test setup ?
>
>  swami
>
>  ________________________________________
>  From: Frank Xue [EMAIL PROTECTED]
>  Sent: Wednesday, May 28, 2008 8:24 AM
>  To: Ashuaria Lee
>  Cc: Subbrathnam, Swaminathan; davinci-linux-open-source
>  Subject: Re: USB CPPI DMA patch for DaVinci
>
>
>  Lee, Swami,
>
>  I did a simple and quick test. The kernel was also configured with
>  default setting.
>  It seems this patch fixed USB stability issue.
>
>  test case:
>    ~ 20 files, about 100MBytes every file.
>
>  Speed benchmark result on git 2.6.25
>  ---------------------------------------------
>  Read:  3.6M Bytes/sec
>  Write:  2.8M Bytes/sec
>
>  Lee, I almost could not believe the writing performance is so poor (
>  0.38MB/sec) on your board.
>  :(
>
>  Regards
>
>  Frank
>
>  Ashuaria Lee wrote:
>  > Hi,
>  >
>  > You patch DID work with the stability, and didn't crash using DMA mode.
>  > And Also I got more speed on reading data from USB-storage.
>  > The reading performance has increased significantly.
>  > But, the write speed has decreased.
>  >
>  > Let me add the screenshot of each results.
>  >
>  > The short summary is
>  > ============================================
>  > MVL 2.6.10 with patch 45 | GIT 2.6.25 with your DMA patch
>  > Read: 8.78MB/sec           |  12MB/sec
>  > Write: 3.7MB/sec            |  0.38MB/sec
>  > ============================================
>  >
>  > The GIT was configured with default setting and only changed to use DMA 
> for USB.
>  > did I do something wrong?
>  >
>  > Any opinions?
>  >
>  > Best Regards,
>  > Ashuaria Lee
>  >
>  >
>


-- 
Regards,
Ashuaria Lee
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to