On Tue, Sep 15, 2009 at 5:58 PM, <wenkatesh.tala...@wipro.com> wrote: > Hi, > > Here you don't need to create the nodes in /dev dir, as they are created on > the boot-up time. > Make sure that your configuration in kernel for the console is correct. And > make sure that the file-system your using is not a corrupted one. > > Regards, > Venkatesh
Hi Venkatesh, I have used defconfig of davinci for kernel configuration. File system is NFS based and working well with previous versions of kernel. Regards, Viral > From: davinci-linux-open-source-boun...@linux.davincidsp.com on behalf of > Viral Sachde > Sent: Tue 9/15/2009 4:42 PM > To: davinci-linux-open-source@linux.davincidsp.com > Subject: Booting kernel 2.6.31-rc7 > > Hi all, > I was trying to boot 2.6.31-rc7 on DM6446 based board. I have attached > complete log in attached file. I was trying to use target filesys of > MVL 5.0 over NFS. I have created console and ttyS0 nodes manually in > /dev folder in NFS before booting kernel. > Let me know if you have any suggestions. > Regards, Viral Sachde > > console and ttyS0 device in /dev folder in NFS: > crw-r--r-- 1 root root 5, 1 2009-09-15 16:32 console > crw-r--r-- 1 root root 4, 64 2009-09-15 16:33 ttyS0 > > Below is last few lines of boot log: > > Freeing init memory: 132K > Warning: unable to open an initial console. > Kernel panic - not syncing: Attempted to kill init! > Backtrace: > [<c002d9b0>] (dump_backtrace+0x0/0x108) from [<c002dad0>] > (dump_stack+0x18/0x1c) > r7:c7023ee0 r6:c032d490 r5:c7020000 r4:c03164c8 > [<c002dab8>] (dump_stack+0x0/0x1c) from [<c003e9c4>] (paci) > [<c003e97c>] (panic+0x0/0x12c) from [<c00415c0>] (do_exit+0x26c/0x628) > r3:c03164c8 r2:c7022000 r1:00000000 r0:c02cca2c > [<c0041354>] (do_exit+0x0/0x628) from [<c0041a98>] (do_group_exit+0xe0/0xe8) > [<c00419b8>] (do_group_exit+0x0/0xe8) from [<c004cbd0>] > (get_signal_to_deliver+0x3d4/0x42c) > r6:00000000 r5:c7022000 r4:00000004 > [<c004c7fc>] (get_signal_to_deliver+0x0/0x42c2 c638>] (do_signal+0x5c/0x4f8) > [<c002c5dc>] (do_signal+0x0/0x4f8) from [<c002ccdc>] > (do_notify_resume+0x2c/0x30) > [<c002ccb0>] (do_notify_resume+0x0/0x30) from [<c0029ecc>] > (work_pending+0x1c/0x20) > > Complete boot log is in attached file. _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source