On Wed, Sep 16, 2009 at 12:32:09, Viral Sachde wrote: > On Wed, Sep 16, 2009 at 12:22 PM, Nori, Sekhar <nsek...@ti.com> wrote: > > On Wed, Sep 16, 2009 at 12:11:19, Viral Sachde wrote: > >> On Tue, Sep 15, 2009 at 8:24 PM, Nori, Sekhar <nsek...@ti.com> wrote: > >> > Hi Viral, > >> > > >> > On Tue, Sep 15, 2009 at 19:06:55, Viral Sachde wrote: > >> >> On Tue, Sep 15, 2009 at 5:58 PM, <wenkatesh.tala...@wipro.com> wrote: > >> >> > Hi, > >> >> > > >> >> > Here you don't need to create the nodes in /dev dir, as they > >> >> > are created on the boot-up time. > >> >> > Make sure that your configuration in kernel for the console is > >> >> > correct. And make sure that the file-system your using is not a > >> >> > corrupted one. > >> >> > > >> >> > Regards, > >> >> > Venkatesh > >> >> > >> >> Hi Venkatesh, > >> >> > >> >> I have used defconfig of davinci for kernel configuration. > >> > > >> > What is the full build step? > >> > > >> > I do something like: > >> > > >> > make distclean davinci_all_defconfig uImage ARCH=arm > >> > CROSS_COMPILE=<path to CodeSourcery 2009q1 toolchain> > >> > > >> >> File system is NFS based and working well with previous versions of > >> >> kernel. > >> > > >> > Within TI we are using filesystem from arago project[1] for testing. > >> > > >> > Can you pick up the one of the latest versions and see if you are > >> > able to boot-up? > >> > > >> > Also, DaVinci git is now based on 2.6.31, you can rebase before retrying. > >> > > >> > Thanks, > >> > Sekhar > >> > > >> > [1] http://arago-project.org/files/releases/ > >> > > >> > > >> > >> > >> Hi Sekhar & all, > >> > >> Thanks for directions. I am now able to boot 2.6.31 compiled with > >> codesourcery tool chain and arago filesys. > >> > >> Couple of things: > >> 1. In codesourcery tool chain mkimage tool is not available. > > > > Hi Viral, > > > > This is a part of U-Boot; it gets built when you build U-Boot. > > > >> 2. In arago project page, lot of release are available, but none > >> marked as latest-stable. > > > > The ones marked -rcX are release candidates, rest are released versions. > > You can pick up the latest released version. > > > > Thanks, > > Sekhar > > > >> > >> Regards, Viral > > Hi all, > > With recent 2.6.31, After configuring AIC audio codec and USB as hub with few > more usb drivers selected, such as serial, mass storage, I re-compiled kernel. > > It is not able to detect AIC33 and USB Hub. Any suggestions are well come. > With LSP 1.30, it was working fine. I have attached boot log and kernel config for 2.6.31. > > Regards, Viral >
Audio is currently broken on master branch. Please check the temp-asoc branch for audio. Regards, Chaithrika _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
