On Wed, Jun 04, 2014 at 07:54:08AM +0100, Ian Campbell wrote: > On Tue, 2014-06-03 at 22:57 +0200, Andreas Henriksson wrote: > > On Tue, Jun 03, 2014 at 11:20:22AM -0700, Vagrant Cascadian wrote: > > > On Tue, Jun 03, 2014 at 06:20:03PM +0200, Andreas Henriksson wrote: > > > > Add something like this to debian/targets: > > > > armhf Cubietruck u-boot.img spl/sunxi-spl.bin > > > > u-boot-sunxi-with-spl.bin > > > > > > > > For extra bonus points also enable FEL mode, possibly like this: > > > > armhf Cubietruck_FEL u-boot.img > > > > spl/sunxi-spl.bin u-boot-sunxi-with-spl.bin > > > > > > I didn't enable the _FEL variant, do you definitely need that as well? ... > I haven't actually tried this yet but I was half thinking it might be > nice/useful to be able to boot D-I from USB using FEL instead of messing > around with TFTP or MMC cards etc. That would require the FEL versions > of u-boot.bin and spl/sunxi-spl.bin (not sure abuot u-boot.img, I don't > use it with FEL at least). ... > FWIW FEL mode would want them split not joined. And I think you need > u-boot.bin not u-boot.img for that case too (or at least that is what > I've always used...).
Ok, based on the above, I'm inclined to build with: armhf Cubietruck u-boot.img spl/sunxi-spl.bin u-boot-sunxi-with-spl.bin armhf Cubietruck_FEL u-boot.bin spl/u-boot-spl.bin (spl/sunxi-spl.bin failed to build with the _FEL target) Hopefully those are the targets you need? If that sounds good, I'll include in the next upload. Definitely starting to think about splitting the u-boot package into one package per platform, at least for armhf... live well, vagrant
signature.asc
Description: Digital signature
