Hi. I wonder if anybody has any advice on network configuration, because I can't get eth1 to pass any traffic out of my router box.
I've got box1's eth0 connected to my dsl line through the dsl modem/router and it picks up the ip, etc. through dhcpcd. This card is connected to the internet fine. I've got box1's eth1 connected to jack 1 of the hub, but the hub doesn't show anything connected. eth1 is a good card, and I can ping it at 192.168.1.1, but I've missed something about configuring it to send traffic out to my hub and my network. eth1 on box1 is configured as follows in /etc/network/interfaces (even though I'm using dhcpcd on eth0, the external ip is always the same, so I'm using static on eth1): iface eth1 inet static address 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway <ext_ip_from_eth0> Does anyone know what I should check now? Thanks very much for any input. Steve