On Wed, 2002-02-20 at 16:01, Sebastiaan wrote: > Hi, > > On 20 Feb 2002, Shriram Shrikumar wrote: > > > Hi Sebastian, > > > > tried booting into win98 again and it worked. LILO was still giving me > > trouble when running it(NOT when booting) - something along the lines > > of, > > > > Device 0x0300: Invalid partition table, 1st entry > > 3D address: 32/1/0 (94) > > Linear address: 1/1/0 (63) > > > > I have partition magic 6 installed and when I ran that - it told me that > > there were some mismatches between the LBA and CHS values and offered to > > fix them - I said yes. > > > > Back in Linux now (and feeling much better) I checked with fdisk and > > there doesn't seem to be a problem with that partition anymore and lilo > > seems to run fine as well. > > > So basically you ran partition magic, fixed the problem and now everything > works fine? Great. I became curious, so could you please send me another > fdisk -l an fdisk -l -u from your current situation? Let's see how it's > solved.
fdisk -l /dev/hda Disk /dev/hda: 255 heads, 63 sectors, 2491 cylinders Units = cylinders of 16065 * 512 bytes Device Boot Start End Blocks Id System /dev/hda1 1 158 1269103+ b Win95 FAT32 /dev/hda2 159 184 208845 83 Linux /dev/hda4 185 2491 18530977+ f Win95 Ext'd (LBA) /dev/hda5 185 312 1028128+ 16 Hidden FAT16 /dev/hda6 313 571 2080386 6 FAT16 /dev/hda7 572 1403 6683008+ b Win95 FAT32 /dev/hda8 1404 1467 514048+ 82 Linux swap /dev/hda9 1468 1589 979933+ 83 Linux /dev/hda10 1590 1640 409626 83 Linux /dev/hda11 1641 1768 1028128+ 83 Linux /dev/hda12 1769 2151 3076416 b Win95 FAT32 fdisk -l -u /dev/hda Disk /dev/hda: 255 heads, 63 sectors, 2491 cylinders Units = sectors of 1 * 512 bytes Device Boot Start End Blocks Id System /dev/hda1 63 2538269 1269103+ b Win95 FAT32 /dev/hda2 2538270 2955959 208845 83 Linux /dev/hda4 2955960 40017914 18530977+ f Win95 Ext'd (LBA) /dev/hda5 2956023 5012279 1028128+ 16 Hidden FAT16 /dev/hda6 5012343 9173114 2080386 6 FAT16 /dev/hda7 9173178 22539194 6683008+ b Win95 FAT32 /dev/hda8 22539258 23567354 514048+ 82 Linux swap /dev/hda9 23567418 25527284 979933+ 83 Linux /dev/hda10 25527348 26346599 409626 83 Linux /dev/hda11 26346663 28402919 1028128+ 83 Linux /dev/hda12 28402983 34555814 3076416 b Win95 FAT32 I dont notice any diff between this and the one before.(v. strange) Then again, how can I get fdisk to display the CHS / LBA values (like pqmagic was talking about) ? Looking at fdisk man, In a DOS type partition table the starting offset and the size of each partition is stored in two ways: as an abso lute number of sectors (given in 32 bits) and as a Cylin ders/Heads/Sectors triple (given in 10+8+6 bits). The for mer is OK - with 512-byte sectors this will work up to 2 TB. The latter has two different problems. First of all, these C/H/S fields can be filled only when the number of heads and the number of sectors per track are known. Sec ondly, even if we know what these numbers should be, the 24 bits that are available do not suffice. DOS uses C/H/S only, Windows uses both, Linux never uses C/H/S. I suppose this explains the problem I have been having - I guess fdisk doesn't need the C/H/S values and therefore maybe doesn't have much facility to change just there values. Learn something new EVERY day. The only diff between what you learn about linux and windoze is that - the more you learn about windoze, the more you tend to dislike it and the more you learn about linux - the more you like Linux (and dislike windows) Regards, Shr > > BTW, do you know of any software that would be able to do something > > similar in Linux ? > > > Hmmm, not really. I guess fdisk is all you have and if you know how to > work with the data and how the disk is constructed, it's all you need. But > it is pretty bare bone, yes. > > Greetz, > Sebastiaan > > > Thanks for all your help, much appreciated. > > > > > > Regards, > > > > > > > > Shri > > > > >