--- "Douglas A. Tutty" <[EMAIL PROTECTED]> a écrit : > On Fri, Jan 04, 2008 at 11:06:31PM +0100, David > MAGNY wrote: > > Hello, > > > > I am upgrading a firewall from Sarge to Etch. > > > > On this machine, I have 3 network cards. > > > > 2 networks cards are identical. It is PCI network > > cards and it is SMC1233A-TX. > > > > On Sarge, everything worked well. > > > > The issue is that only one card of both is > available. > > What exactly does this line mean? Do you mean that > of the two identical > cards, only one is available?
Yes, only one is available > > > The used kernel is 2.6.18. > > > > Within the dmesg log file, I have the following > > information : > > > > > I noticed that the two identical network cards are > > detected : > > > > eth1: ADMtek Comet rev 17 at 0001c800, > > 00:50:BF:B0:CB:4B, IRQ 217. > > ACPI: PCI Interrupt 0000:03:0d.0[A] -> GSI 49 > (level, > > low) -> IRQ 225 > > tulip1: MII transceiver #1 config 1000 status > 786d > > advertising 05e1. > > eth2: ADMtek Comet rev 17 at 0001cc00, > > 00:50:BF:B7:F2:79, IRQ 225. > > > > I added the following parameters to the kernel > > pci=irprouting, and I always have the same issue. > > You also have this (culled from your dmesg) > > > e1000: eth0: e1000_probe: Intel(R) PRO/1000 > Network > > Connection > > usb 1-1: device not accepting address 2, error -71 > > Vendor: ATA Model: WDC WD800AAJS-18 Rev: > 01.0 > > Type: Direct-Access ANSI > SCSI > > revision: 05 > > ACPI: PCI Interrupt 0000:03:0c.0[A] -> GSI 53 > (level, > > low) -> IRQ 217 > > tulip0: MII transceiver #1 config 1000 status > 786d > > advertising 05e1. > > so at least you know that the kernel is finding the > card. > > I don't like the 2.6 dmesg with messages from > different modules being > intermixed. Since I don't know the kernel > internals, its hard for me to > tell what line belongs to which device if it doesn't > start with a device > node. So, in this case, I don't know if the third > line (usb 1-1...) > relates to the problem or not. > > This suggests that eth0 is the intel card, while > eth1 and eth2 are the > two ADMtek comets. Yes you are right. But, I use ifrename (/etc/iftab) in order to be sure that a network interface has always the same name when I restart the server. if my /etc/iftab I mention that, ethO is one of ADMtek comet eth1 is the intel card eth2 is the other ADMtek card and in fact eth2 is not available. > What does your /etc/network/interfaces look like? #eth0 is connected to Internet auto eth0 iface eth0 inet static address X.X.X.X netmask X.X.X.X network X.X.X.X broadcast X.X.X.X gateway X.X.X.X #eth1 is connected to the private network auto eth1 iface eth1 inet static address 192.168.0.254 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 #eth2 is connected to the DMZ auto eth2 iface eth2 inet static address 192.168.2.254 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 > > Doug. > David > > -- > To UNSUBSCRIBE, email to > [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > > _____________________________________________________________________________ Ne gardez plus qu'une seule adresse mail ! Copiez vos mails vers Yahoo! Mail http://mail.yahoo.fr -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]