On Sat, Jan 05, 2008 at 01:11:41PM +0100, David MAGNY wrote: > --- "Douglas A. Tutty" <[EMAIL PROTECTED]> a ?crit > > On Fri, Jan 04, 2008 at 11:06:31PM +0100, David > > MAGNY wrote: > > > Hello, > > > > > > I am upgrading a firewall from Sarge to Etch. > > > > > > On this machine, I have 3 network cards. > > > > > > 2 networks cards are identical. It is PCI network > > > cards and it is SMC1233A-TX. > > > > > > On Sarge, everything worked well. > > > > > > The issue is that only one card of both is > > available. > > > > What exactly does this line mean? Do you mean that > > of the two identical > > cards, only one is available? > > Yes, only one is available > > so at least you know that the kernel is finding the > > card. > > [snip dmesg that shows all three cards] > > This suggests that eth0 is the intel card, while > > eth1 and eth2 are the > > two ADMtek comets. > > Yes you are right. But, I use ifrename (/etc/iftab) in > order to be sure that a network interface has always > the same name when I restart the server. > > if my /etc/iftab I mention that, > ethO is one of ADMtek comet > eth1 is the intel card > eth2 is the other ADMtek card > > and in fact eth2 is not available. > >
What if you don't use iftab? If, as a test, you just go ahead and set up all three cards? Does /sbin/ifconfig then show three cards configured? If so, then dmesg and the kernel are just fine, the problem is in ifrename. I've never needed ifrename so I don't know about it. > > > What does your /etc/network/interfaces look like? > #eth0 is connected to Internet > auto eth0 > iface eth0 inet static > address X.X.X.X > netmask X.X.X.X > network X.X.X.X > broadcast X.X.X.X > gateway X.X.X.X > > #eth1 is connected to the private network > auto eth1 > iface eth1 inet static > address 192.168.0.254 > netmask 255.255.255.0 > network 192.168.0.0 > broadcast 192.168.0.255 > > #eth2 is connected to the DMZ > auto eth2 > iface eth2 inet static > address 192.168.2.254 > netmask 255.255.255.0 > network 192.168.2.0 > broadcast 192.168.2.255 > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
