On Mon, Feb 7, 2011 at 8:22 PM, drew <d...@baseanswers.com> wrote: > On Mon, 2011-02-07 at 20:08 -0700, Jeff Chimene wrote: > > On 02/07/2011 08:05 PM, drew wrote: > > > On Mon, 2011-02-07 at 19:50 -0700, Jeff Chimene wrote: > > >> On 02/07/2011 04:59 PM, drew wrote: > > >>> On Mon, 2011-02-07 at 15:52 -0700, Jeff Chimene wrote: > > >> > > >> Do you still want the large banner? > > >> > > >> If so, we'll need an image that has the following dimensions > > >> 71.80" x 30.20" > > >> 1824mm x 767mm > > >> 5385 x 2265 pixels > > > > > > YES (ah somehow I thought you where going with 5' not 6.) > > > > VistaPrint only does fixed sizes. You were right: originally it was 5'. > > However, that's not possible with VistaPrint. > > > > > - give me a few minutes. > > > > No problem. I have plenty to do this evening. > > > > > I could produce one with the contemporary logo, but looking at the > > > photos from FOSDEM it does not look like the banner uses it, it looks > > > like it uses the one in the file you have. > > > > Good. I'm glad you're tracking that. > > http://oucv.org/libreoffice/banner_72inx30in.pdf > > same deal, the svg is along side just change the descriptor. >
The image is just a bit too wide. The edge of the "e" in "office" and the right edge of the "n" in "foundation" are in the trim margin. That means they'll be cut during the trimming process. I'm guessing that the image is 3mm too wide. Can you adjust it? I'm going to check the small banner now. Cheers,. jec -- Unsubscribe instructions: E-mail to design+h...@libreoffice.org List archive: http://listarchives.libreoffice.org/www/design/ *** All posts to this list are publicly archived for eternity ***
