On 02/07/2011 08:05 PM, drew wrote: > On Mon, 2011-02-07 at 19:50 -0700, Jeff Chimene wrote: >> On 02/07/2011 04:59 PM, drew wrote: >>> On Mon, 2011-02-07 at 15:52 -0700, Jeff Chimene wrote: >>>> On 02/07/2011 03:48 PM, Christoph Noack wrote: >>>>> Hi Jeff, >>>>> >>>>> yes, all the material is available. Just being curious, what do you >>>>> intend to do? >>>> >>>> Thanks, Christoph >>>> >>>> Here's the relevant thread: >>>> >>>> http://www.mail-archive.com/design@libreoffice.org/msg00747.html >>>> >>> >>> Hi Jeff, >>> >>> Here is a pdf file that should work for the 5' x 2.5' banner >>> >>> http://oucv.org/libreoffice/banner_60inx30in.pdf >>> >>> >>> //drew >> >> HI Drew: >> >> Do you still want the large banner? >> >> If so, we'll need an image that has the following dimensions >> 71.80" x 30.20" >> 1824mm x 767mm >> 5385 x 2265 pixels > > YES (ah somehow I thought you where going with 5' not 6.)
VistaPrint only does fixed sizes. You were right: originally it was 5'. However, that's not possible with VistaPrint. > - give me a few minutes. No problem. I have plenty to do this evening. > I could produce one with the contemporary logo, but looking at the > photos from FOSDEM it does not look like the banner uses it, it looks > like it uses the one in the file you have. Good. I'm glad you're tracking that. > Also I see they went much closer to edges then I did, I'll do that also, > which will raise the height, which is a good thing. Agreed. > BRB Standing by. How do we make sure that Bernhard is in the loop? -- Unsubscribe instructions: E-mail to design+h...@libreoffice.org List archive: http://listarchives.libreoffice.org/www/design/ *** All posts to this list are publicly archived for eternity ***